m11开始默认需要修改所有用户密码才能开启远程访问 默认只能本机访问本次演示第三条使用命令行来进行修改密码并开启远程访问进入到安装包bin目录下使用脚本 commandstool.sh 来修改密码首先第一次使用这个脚本 需要修改下使用脚本的密码 默认账密cli/cli123.com./commandstool.sh change-admin-password[rootlixiaoyao bin]# ./commandstool.sh change-admin-password Please enter the admin user namecli Please enter the old admin passwordcli123.com Please enter the new admin passwordThanos12.com Please enter the new admin password againThanos12.com Command change-admin-password executed successfully.这个步骤呢就是修改cli 命令行的账密 修改完之后后续开启远程访问以及修改TW所有用户要用到开启远程访问并修改密码./commandstool.sh update-console-remote-access --thanosPasswordTongweb12.com --securityPasswordThanos12.com --auditorPasswordThanos12.com --monitorPasswordThanos12.com remote[rootlixiaoyao bin]# ./commandstool.sh update-console-remote-access --thanosPasswordTongweb12.com --securityPasswordThanos12.com --auditorPasswordThanos12.com --monitorPasswordThanos12.com remote Please enter the admin user namecli Please enter the admin passwordThanos12.com ************************ Console access type is set to: remote Password update summary - updated users: [thanos, security, auditor, monitor], ignored users (already changed before): [none]. ************************ Command update-console-remote-access executed successfully.由于thanos这个用户在命令行这边不能直接使用这个Thanos12.com 不能出现他自己的名字 否则会报错密码尽量保持一致 方便好记 控制台里面再去把thanos密码改成Thanos12.com就可以了如果觉得麻烦可以写个脚本#!/bin/sh #Set the users password clipasswordThanos12.com thanosPasswordTongweb12.com securityPasswordThanos12.com auditorPasswordThanos12.com monitorPasswordThanos12.com cipher$(./password.sh cli123.com | awk -F: {gsub(/^[ \t]|[ \t]$/,,$2);print $2}) echo AS_ADMIN_password${cipher} pwdfile ./commandstool.sh change-admin-password --interactivefalse --usercli --newpassword${clipassword} --passwordfilepwdfile cli cipher$(./password.sh ${clipassword} | awk -F: {gsub(/^[ \t]|[ \t]$/,,$2);print $2}) echo AS_ADMIN_password${cipher} pwdfile ./commandstool.sh update-console-remote-access --interactivefalse --thanosPassword${thanosPassword} --securityPassword${securityPassword} --auditorPassword${auditorPassword} --monitorPassword${monitorPassword} --usercli --passwordfilepwdfile remote脚本中的thanos密码是Tongweb12.com 其他都是Thanos12.com再去访问控制台就可以正常使用了thanos 系统管理员 可以对TW进行各种维护、部署、监控及配置操作security 安全保密管理员 可对TW用户进行权限分配auditor 安全审计员 日常操作会记录到审计日志中monitor 监视管理员 进行监控新建的域怎么开启远程访问呢在原有的基础上加上 --port 9061 域的控制台端口 默认递增加1./commandstool.sh change-admin-password --port 9061./commandstool.sh update-console-remote-access --port9061 --thanosPasswordTongweb12.com --securityPasswordThanos12.com --auditorPasswordThanos12.com --monitorPasswordThanos12.com remote用法跟9060一样开启heimdall开启远程访问也是一样./commandstool.sh update-heimdall-remote-access --rigPasswordThanos12.com --secadmPasswordThanos12.com --auditPasswordThanos12.com --monitorPasswordThanos12.com remote